Printers by Rick Broida Oct 16, Close the multipurpose tray. Because the image is prepared for printing in a single unit, problems aligning the cyan, magenta, yellow and black dots have been overcome, even at very high speeds. Upper Media Tray Jams Remove the media tray. Check for media scraps inside the printer.

Uploader: Tauran
Date Added: 8 June 2017
File Size: 53.62 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 90681
Price: Free* [*Free Regsitration Required]

Do not use force to clean the sensor window. Remove the used imaging unit. Comments to this Manuals Mgaicolor Name. In addition, always handle circuit boards by the edges only. Turn on the printer.

Attention Be careful not to touch the transfer drum while removing jammed media. Attention Lift the roller carefully to prevent toner from spilling out.

The transfer roller or fuser unit may be misinstalled or defective. Any pieces of media left in the printer, whether large or small, can obstruct the paper path and cause further jams. Remove any jammed media from the printer. Remove any media remaining in the tray.

Attention Readjust the media guides after inserting the media. Remove any tape or adhesive that may have become lodged in the paper path.

Related Drivers  AMD CATALYST 12.4 DRIVER

Konica Minolta magicolor 3100 DN – printer – color – laser

Check the message display to see which color toner is out. Remove the OHP media and load it in the tray one sheet at a time. One optional internal IDE hard disk is supported. Workgroup printer – laser – color.


The printer is on a hard, flat, level surface. Page Turn off the printer, and maigcolor disconnect the power cord and all interface cables from the printer. Driver settings are not correct. Often, an arrow on the media package label indicates the printing-side of the media.

Attention Except for transparencies, do not mix media of different sizes, types, or weights in the same tray, as this will cause printer jamming. Symptom Cause Abnormal The imaging unit may areas be old or damaged.

Cut-sheet The maximum media weight supported for duplex printing Solution Remove the imaging unit, and check for damage. Page If not, download it to profile your printer. Doing so may damage the printer and cause the print quality to deteriorate.


The image unit performs an automatic cleaning rotation after every page of one-page simplex jobs, after the fourth page of average four-page simplex continuous print jobs. Toner cartridges and other consumables for your printer are available from your local vendor or Q-SHOP www.

Replacing a Toner Cartridge Handle the toner cartridges carefully to avoid spilling toner inside the printer or on yourself. Locate the registration rollers one is black and one is metallic.

Konica Minolta 1710490-002 1710490002 Yellow Toner Magicolor 3100

Tablets by Dan Ackerman 8 days ago. Service Messages Service Messages A service message sometimes occurs as a result of an unusual combination of events, not because of an actual problem.

Do not dispose of it by burning. We delete comments that violate our policywhich we encourage you to read. Opacity refers to how effectively paper blocks out what is written on the opposite side of the page.