We have released a second-generation version of this motor driver, the Pololu G2 High-Power Motor Driver 18v17 , that is a near drop-in replacement for this older driver and is better in almost every way. During normal operation, this product can get hot enough to burn you. Such installations are compact but might limit heat sinking options; also, depending on the power supply quality and motor characteristics, a larger capacitor might be required. Fault flag 2 indicator: There are currently seven versions of the high-power motor driver, each with a different operating voltage and current range. B motor output pin. FF2 goes high when certain faults have occurred.
|Date Added:||26 June 2014|
|File Size:||7.74 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
2×15A DC Motor Driver
Fault flag 2 indicator: Pololu high-power motor driver with included components soldered in. This is the main 5.
When held low, it puts the driver into a low-power sleep mode and clears any latched fault flags. This allows two modes of operation: Such installations are compact but might limit heat sinking options; also, depending on the power supply quality and motor characteristics, a larger capacitor might be required.
The motor and motor power connections are on one side of the board, mootor the control connections 5V logic are on the other side. A motor output pin. This output should not be connected to other external power supply lines.
As an alternative to these motor drivers, our Simple Motor Controllers have similar power characteristics and offer high-level interfaces e. The motor driver can detect three different ief7862pbf states, which are reported on the FF1 and FF2 pins. A short-circuit fault is latched, meaning motog outputs will stay off and the fault flag will stay high, until the board is reset RESET brought low.
Blower – Squirrel Cage This is the main 5.
Using the Motor Driver Connections The motor and motor power connections are on one side of the board, and the control connections 5V logic are on the other side. Pololu high-power motor driver and included components. Irf786pbf older design is not recommended for new projects that require its continued availability. Make sure you know what you are doing when using high voltages or currents!
Pololu High-Power Motor Driver 18v15
The reset pin, when pulled low, puts the board into a low-power sleep mode and clears any latched fault flags. Weather Station and Senso See table below for details. The six driver modules without current-sense feedback i.
FF1 goes high when certain faults have occurred. This regulated 5V output provides a few milliamps. The three CS versions have the same pinout, and the six non-CS versions have the same pinout.
The logic connections are designed to interface with 5V systems 5. The under-voltage fault disables outputs but is not latched. Add to mptor Add to wish list.
2×15A DC Motor Driver – DFRobot
Triple Diffused Silicon N UniPi Expansion Board for Take proper safety precautions when using high-power electronics. The peak ratings are for quick transients e. There are currently nine versions of the high-power motor driver, each with a different operating voltage and current range. With the PWM pin held low, both motor outputs rif7862pbf be held low a brake operation.
See the section at the bottom of the G2 product page for a complete list of the differences. Pulse width modulation input: